Originally published at: http://www.howtogeek.com/162060/how-to-install-nzbget-for-lightweight-usenet-downloading-on-your-raspberry-pi/
We recently showed you how to turn your Raspberry Pi into an always on Usenet machine centered around the feature-rich SABnzbd Usenet client. Now we’re back to show you how to use NZBGet, a more Spartan but also very lightweight Usenet tool.
In "/etc/init.d/nzbget" you have a typo:
ase "$1" in
case "$1" in
Thanks, typo should now be fixed
Very nice and helpful howto!
Unfortunately it stops where it got interesting in the previous article "How to Automate Your Always-On Raspberry Pi Download Box": The integration into SickBeard and CouchPotato is missing.
I tried to follow this previous howto but NZBget has major differences in regards to post processing.
If possible, could you update this how to with a small section on how to get NZBget postprocessing work with Sickbeard/ CouchPotato/ ...?
Thank you and Best Regards! Keep up the good work!
I just tried to install nzbget on my raspberry but I got stuck at patching the libpar2 the follwing line of code:
If i typ the line of code I get this back:
pi@raspberrypi ~/nzbget-10.2/libpar2-0.2 $ cp /temp-nzbget/nzbget-10.2/libpar2-0.2-.patch
cp: missing destination file operand after /temp-nzbget/nzbget-10.2/libpar2-0.2-.patch'
What am I doing wrong? All the other articles worked fine.
I'm getting the same error as Jordy - everything else seems to work fine?
I've followed the articles on the pi from the beginning. Been working on it for over six mo. Finally got sabnzb and sickbeard to run. But sickbeard crashes after setting all configs and trying to add a show. This probably isn't the place for this comment but I think the whole process needs to be revisited by htg.
How would one update at the end of all this, the guide is for v10, I installed using 12, but what happens when 12.X or 13 comes out?
I am having a problem getting past the patch of libpar2. Every time I try the cp
"cp /temp-nzbget/nzbget-10.2/libpar2-0.2-*.patch ."
pi@raspberrypi /temp-nzbget/nzbget-10.2/libpar2-0.2 $ cp /temp-nzbget/nzbget-10.2/libpar2-0.2-*.patch .
cp: cannot stat `/temp-nzbget/nzbget-10.2/libpar2-0.2-*.patch': No such file or directory
No matter what I do. I tried to skip it and go to the next section but it says there is no make file.
I'm stuck unless someone has a suggestion.
Try this instead - It's a later version of libpar2, which already contains the bugfixes and cancelling, so there isn't a need to patch.
sudo wget https://launchpad.net/libpar2/trunk/0.4/+download/libpar2-0.4.tar.gz
sudo tar -xvf libpar2-0.4.tar.gz
sudo make install